Apple iPhone 12 and iPhone 12 Pro recently released to the public. This is the teardown of the iPhone 12 and 12 Pro to check the internal parts. Recently, the teardown is done by AIO Technology shows that Apple iPhone 12 and iPhone 12 Pro both use the same battery model and same battery capacity of 2815mAh.
Both iPhone 12‌ and iPhone 12 Pro have the same L-shaped logic board, and ‌iPhone 12 Pro‌ is equipped with a LiDAR connector for the LiDAR scanner, that is only the change. The only difference between both iPhones is a LiDAR connector. iPhone 12‌’s logic board does not have a soldered LiDAR connector. Except that, two logic boards are exactly the same.
Besides, the iPhone 12 uses plastic blocks to fill the original LiDAR space and telephoto camera positions on the Pro version. Apple has not used this to increase the battery space on iPhone 12 but both batteries are the same.
If we see theoretically the internal parts on iPhone 12 and iPhone 12 Pro are interchangeable but we are not sure if you can change these parts practically. After a comparative analysis, iPhone 12 and iPhone 12 Pro’s front camera, linear motor, speaker, bottom board, battery, etc. they all are exactly the same.
Additionally, both ‌iPhone 12‌ and ‌iPhone 12 Pro‌ use the same 2815mAh battery inside, which also explains why the two models have the same battery life.
It is confirmed that the iPhone 12 has a battery capacity of 2815 mAh as well as the iPhone 12 Pro has the same battery. They both have an internal MagSafe magnetic system. Even though this the iPhone 11, iPhone 12 is 11% thinner, 15% smaller and 16% lighter.
